Sas Routing - AudioCodes Mediant 800 MSBG User Manual

8.5.1.2.2 Emergency State
If the UAs detect that their primary (external) proxy does not respond, they immediately
register to SAS and start routing calls to it.
Figure 8-102: SAS Redundant Mode in Emergency State (Example)
8.5.1.2.3 Exiting Emergency and Returning to Normal State
Once the connection with the primary proxy is re-established, the following occurs:
UAs: switch back to operate with the primary proxy.
SAS: ignores REGISTER requests from the UAs, forcing the UAs to switch back to
the primary proxy.
Note: This is applicable only if the 'SAS Survivability Mode' parameter is set to
'Always Emergency' (2).
8.5.2

SAS Routing

This section provides flowcharts describing the routing logic for SAS in normal and
emergency states.
SIP User's Manual 586
Mediant 800 MSBG
Document #: LTRT-12804