AudioCodes Mediant 800 MSBG User Manual page 678

Parameter
Web: AAA Indications
EMS: Indications
[AAAIndications]
Web: Device Behavior Upon
RADIUS Timeout
[BehaviorUponRadiusTimeout]
[MaxRADIUSSessions]
[RADIUSRetransmission]
[RadiusTO]
Web: RADIUS Authentication
Server IP Address
[RADIUSAuthServerIP]
Web: RADIUS Authentication
Server Port
[RADIUSAuthPort]
Web: RADIUS Shared Secret
[SharedSecret]
Web: Default Access Level
[DefaultAccessLevel]
Web: Local RADIUS Password
Cache Mode
[RadiusLocalCacheMode]
Web: Local RADIUS Password
Cache Timeout
[RadiusLocalCacheTimeout]
SIP User's Manual
[1] At Connect & Release = Sent at call connect and release.
[2] At Setup & Release = Sent at call setup and release.
Determines the Authentication, Authorization and Accounting
(AAA) indications.
[0] None = No indications (default).
[3] Accounting Only = Only accounting indications are used.
Defines the device's response upon a RADIUS timeout.
[0] Deny Access = Denies access.
[1] Verify Access Locally = Checks password locally (default).
Number of concurrent calls that can communicate with the
RADIUS server (optional).
The valid range is 0 to 240. The default value is 240.
Number of retransmission retries.
The valid range is 1 to 10. The default value is 3.
Determines the time interval (measured in seconds) the device
waits for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default value is 10.
IP address of the RADIUS authentication server.
Note: For this parameter to take effect, a device reset is required.
RADIUS Authentication Server Port.
Note: For this parameter to take effect, a device reset is required.
'Secret' used to authenticate the device to the RADIUS server.
This should be a cryptically strong password.
Defines the default access level for the device when the RADIUS
(authentication) response doesn't include an access level
attribute.
The valid range is 0 to 255. The default value is 200 (Security
Administrator').
Defines the device's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the user name and password (verified by
the RADIUS server).
[0] Absolute Expiry Timer = when you access a Web page, the
timeout doesn't reset, instead it continues decreasing.
[1] Reset Timer Upon Access = upon each access to a Web
page, the timeout always resets (reverts to the initial value
configured by RadiusLocalCacheTimeout).
Defines the time (in seconds) the locally stored user name and
password (verified by the RADIUS server) are valid. When this
time expires, the user name and password become invalid and a
must be re-verified with the RADIUS server.
The valid range is 1 to 0xFFFFFF. The default value is 300 (5
minutes).
[-1] = Never expires.
[0] = Each request requires RADIUS authentication.
678
Mediant 800 MSBG
Description
Document #: LTRT-12804