SIP User's Manual
4.
Select the Registration tab.
a.
Configure 'Is Register Needed' field:
♦
♦
b.
Click Apply and close the active window.
5.
Open the 'SIP EndPoints' frame (Configuration pane > SIP Endpoints menu).
a.
Click the
'Phones' screen is displayed.
b.
Double-click each field to enter values.
c.
Right-click the new entry, and then select Unlock Rows.
d.
Click Apply and close the active window.
Note:
6.
If a Proxy Server is not implemented, map outgoing telephone calls to IP addresses.
Open the 'SIP Routing' frame (Configuration pane > SIP Routing menu).
a.
Select the Tel to IP tab.
b.
Click the
Routing table is displayed.
c.
Double-click each field to enter values.
d.
Right-click the new entry and select Unlock Rows.
e.
Click Apply and close the active window.
Version 6.2
No = the device doesn't register to a Proxy/Registrar server (default).
Yes = the device registers to a Proxy/Registrar server at power up and every
user-defined interval ('Registration Time' parameter).
button to add a new entry, and then click Yes to confirm; the
For T1 ISDN spans, configure 1-23 (and not 1-24) for B-channels. Channel
24 is a signaling ISDN channel.
button to add a new entry, and then click Yes to confirm; the Tel to IP
381
5. EMS-Based Management
February 2011