To view a list of computers currently recognized by the DHCP server and to add
a new computer with a static IP address:
1.
Click the DHCP Server item (Configuration tab > Data Settings menu > Services >
DHCP Server).
2.
Click the Connection List button located at the bottom of the page; the following page
appears.
Figure 3-192: Computers Recognized by DHCP Server
3.
To define a new connection with a fixed IP address, click the New Static Connection
link; the following page appears:
Figure 3-193: Defining New Static Connection (IP Address)
4.
Enter a host name for this connection.
5.
Enter the fixed IP address that you would like to have assigned to the computer.
6.
Enter the MAC address of the computer's network card.
Note:
7.
Click OK to save the settings.
3.3.3.7
Data Routing
The Data Routing submenu allows you to configure the device's routing rules, and
includes the following items:
General Routing (see ''Configuring General Routing Settings'' on page 277)
BGP & OSPF (see ''Configuring BGP and OSPF'' on page 281)
SIP User's Manual
A device's fixed IP address is actually assigned to the specific network card's
(NIC) MAC address installed on the LAN computer. If you replace this
network card then you must update the device's entry in the DHCP
Connections list with the new network card's MAC address.
276
Mediant 800 MSBG
Document #: LTRT-12804