Figure 8-90: Defining Ip Profile For Itsp - AudioCodes Mediant 800 MSBG User Manual

e. Click Submit.
8.4.10.5.4 Step 4: Assign IP Profiles to IP Groups
The procedure below describes how to assign the IP Profiles defined in ''Step 3: Define IP
Profiles'' on page
that you have defined an IP Group (e.g., #1) for the LAN Users and an IP Group (e.g., #2)
for the ITSP.
To assign IP Profiles to the IP Groups:
1. Open the 'IP Group Table' page (Configuration tab > VoIP menu > Control Network
submenu > IP Group Table).
2. Assign IP Profile #1 to LAN user IP Group #1:
a. From the 'Index' drop-down list, select '1'.
b. From the 'IP Profile ID' drop-down list, select '1'. This is the IP Profile that you
defined for the LAN users.
SIP User's Manual

Figure 8-90: Defining IP Profile for ITSP

572 to the IP Groups for the LAN users and ITSP. This stage assumes
574
Mediant 800 MSBG
Document #: LTRT-12804