Figure 3-319: Adding A New Filter - AudioCodes Mediant 800 MSBG User Manual

To add a new log display filter:
1. In the 'Filters' group, click the New Filter link; the 'Filters' group displays a new
Component entry.
2. Using the drop-down lists, select the component and severity level by which to sort the
log messages.
3. Click Apply Filters to display the messages in your specified criteria.
You can also delete filters using their respective action icons. Clicking Reset Filters
deletes all the defined filters. Defined filters override the default filter that displays all
messages.
You can use the buttons located at the top of the page to perform the following:
Close: closes the 'Log' page and returns to the device's Home page.
Clear Log: clears all currently displayed log messages.
Refresh: refreshes the page to display the latest log messages.
SIP User's Manual

Figure 3-319: Adding a New Filter

364
Mediant 800 MSBG
Document #: LTRT-12804