AudioCodes Mediant 800 MSBG User Manual page 870

Parameter
Web: SBC Alternative Routing Reasons Table
EMS: Alternative Routing Reasons
[SBCAlternativeRoutingReasons]
SIP User's Manual
IP2IPRouting_RequestType, IP2IPRouting_DestType,
IP2IPRouting_DestIPGroupID, IP2IPRouting_DestSRDID,
IP2IPRouting_DestAddress, IP2IPRouting_DestPort,
IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;
[\IP2IPRouting]
For example:
IP2IPRouting 1 = 1, *, *, *, *, 3, 0, -1, -1, , 0, -1, 0;
Notes:
This table can include up to 120 indices (where 0 is the
first index).
For a specific routing rule to be effective, the matching
characteristics must match. If no matching rule is located,
the call is rejected.
For a detailed description of the table's individual
parameters and for configuring the table using the Web
interface, see ''Configuring SBC IP2IP Routing'' on page
201.
For a description on configuring ini file table parameters,
see ''Configuring ini File Table Parameters'' on page 368.
This ini file table parameter configures the SBC Alternative
Routing Reasons table. This table is used for alternative IP-
to-IP routing (defined in the 'IP2IP Routing' table). If 4xx,
5xx, or 6xx SIP responses are received as a result of
outgoing SIP dialog-initiating methods (e.g., INVITE,
OPTIONS, and SUBSCRIBE messages), the device re-sends
the messages (to an alternative route) if the response is
defined in this table and if there are alternative routes
configured in the 'IP2IP Routing' table.
The format of this parameter is as follows:
[ SBCAlternativeRoutingReasons ]
FORMAT SBCAlternativeRoutingReasons_Index =
SBCAlternativeRoutingReasons_ReleaseCause;
[ \SBCAlternativeRoutingReasons ]
For example:
SBCAlternaiveRoutingReasons 0 = 403;
SBCAlternativeRoutingReasons 1 = 404;
Notes:
This table can include up to five indices (where 0 is the
first index).
For a description on configuring ini file table parameters,
see ''Configuring ini File Table Parameters'' on page 368.
870
Mediant 800 MSBG
Description
Document #: LTRT-12804