Figure 8-11: Defining Ip Groups - AudioCodes Mediant 800 MSBG User Manual

SIP User's Manual
8. Configure IP Groups in the 'IP Group Table' page (Configuration tab > VoIP menu >
Control Network submenu > IP Group Table). The figure below configures IP Group
for ITSP A. Do the same for ITSP B but for Index 2 with SRD 1 and Media Realm to
"Realm2".
9. Configure IP-to-Trunk Group routing in the 'Inbound IP Routing Table' page
(Configuration tab > VoIP menu > GW and IP to IP submenu > Routing submenu >
IP to Trunk Group Routing):
10. Configure Trunk Group-to-IP routing in the 'Outbound IP Routing Table' page
(Configuration tab > VoIP menu > GW and IP to IP submenu > Routing submenu >
Tel to IP Routing):
Figure 8-13: Defining Trunk Group to IP Group Routing
Version 6.2

Figure 8-11: Defining IP Groups

Figure 8-12: Defining IP-to-Trunk Group Routing
411
8. IP Telephony Capabilities
February 2011