AudioCodes Mediant 800 MSBG User Manual page 782

Parameter
BRI-to-SIP Supplementary Services Codes for Call Forward
Note: Upon receipt of an ISDN Facility message for call forward from the BRI phone, the device
sends a SIP INVITE to the softswitch with a user-defined code in the SIP To header, representing the
reason for the call forward. For a detailed description of BRI call forwarding, see ''BRI Call
Forwarding'' on page 460.
Call Forward Unconditional
[SuppServCodeCFU]
Call Forward Unconditional
Deactivation
[SuppServCodeCFUDeact]
Call Forward on Busy
[SuppServCodeCFB]
Call Forward on Busy
Deactivation
[SuppServCodeCFBDeact]
Call Forward on No Reply
[SuppServCodeCFNR]
Call Forward on No Reply
Deactivation
[SuppServCodeCFNRDeact]
SIP User's Manual
Notes:
For an explanation on each of the table's parameters and for
configuring the table using the Web interface, see ''Configuring
ISDN Supplementary Services'' on page 191.
For an explanation on using ini file table parameters, see
''Configuring ini File Table Parameters'' on page 368.
Prefix code for activating Call Forward Unconditional sent to the
softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Prefix code for deactivating Call Forward Unconditional Deactivation
sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Prefix code for activating Call Forward on Busy sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Prefix code for deactivating Call Forward on Busy Deactivation sent
to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Prefix code for activating Call Forward on No Reply sent to the
softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Prefix code for deactivating Call Forward on No Reply Deactivation
sent to the softswitch.
The valid value is a string. The default is an empty string.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
782
Mediant 800 MSBG
Description
Document #: LTRT-12804