AudioCodes Mediant 800 MSBG User Manual page 215

SIP User's Manual
Parameter
Suffix to Add
[Suffix2Add]
Privacy Restriction Mode
[PrivacyRestrictionMode]
Version 6.2
The number or string that you want added to the end of the user name.
For example, if you enter '01' and the user name is "bobby", the new
user name is "bobby01".
Determines user privacy handling (i.e., restricting source user identity
in outgoing SIP dialogs).
[0] Transparent = No intervention in SIP privacy (default).
[1] Don't change privacy = The user identity remains the same as in
the incoming SIP dialog. If a restricted number exists, the restricted
presentation is normalized as follows:
From URL header: anonymous@anonymous.invalid.
If a P-Asserted-Identity header exists (either in the incoming
SIP dialog or added by the device), a Privacy header is added
with the value "id".
[2] Restrict = The user identity is restricted (the restricted
presentation is as mentioned above).
[3] Remove Restriction = The device attempts to reveal the user
identity by setting user values in the From header and removing the
privacy "id" value if the Privacy header exists.
If the From header user is anonymous, the value is taken from the P-
Preferred-Identity, P-Asserted-Identity, or Remote-Party-ID header (if
exists).
The device identifies an incoming user as restricted if one of the
following exists:
From header user is anonymous.
P-Asserted-Identity and Privacy headers contain the value "id".
Note: All restriction logic is performed after the user number has been
manipulated.
215
3. Web-Based Management
Description
February 2011