Dhcp Parameters - AudioCodes Mediant 500 E-SBC User Manual

User's Manual

54.2.7 DHCP Parameters

The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
Web: Enable DHCP
EMS: DHCP Enable
[DHCPEnable]
EMS: DHCP Speed Factor
[DHCPSpeedFactor]
DHCP Servers Table
Version 6.8
Table 54-15: DHCP Parameters
Parameter
711
54. Configuration Parameters Reference
Description
Enables DHCP client
functionality.

[0] Disable (default)

[1] Enable
Notes:

For this parameter to take
effect, a device reset is
required.

For a detailed description of
DHCP, see ''DHCP-based
Configuration Server'' on
page 583.

This parameter is a "hidden"
parameter. Once defined
and saved to flash memory,
its value doesn't revert to
default even if the parameter
doesn't appear in the ini file.
Defines the device's DHCP
renewal speed for a leased IP
address from a DHCP server.

[0] = Disable

[1] = (Default) Normal

[2] to [10] = Fast
When set to 0, the DHCP lease
renewal is disabled. Otherwise,
the renewal time is divided by
this factor. Some DHCP-
enabled routers perform better
when set to 4.
Note: For this parameter to take
effect, a device reset is
required.
Mediant 500 E-SBC