AudioCodes Mediant 800 MSBG User Manual page 429

SIP User's Manual
Using INFO message according to Korea mode: DTMF digits are carried to the
remote side in INFO messages. To enable this mode, define the following:
•
RxDTMFOption = 0 (i.e., disabled)
•
TxDTMFOption = 3
Note that in this mode, DTMF digits are erased from the audio stream
(DTMFTransportType is automatically set to 0).
Notes:
The following parameters affect the way the device handles the DTMF digits:
TxDTMFOption, RxDTMFOption, and RFC2833PayloadType
MGCPDTMFDetectionPoint, DTMFVolume, DTMFTransportType, DTMFDigitLength,
and DTMFInterDigitInterval
Version 6.2
•
The device is always ready to receive DTMF packets over IP in all
possible transport modes: INFO messages, NOTIFY, and RFC 2833 (in
proper payload type) or as part of the audio stream.
•
To exclude RFC 2833 Telephony event parameter from the device's
SDP, set RxDTMFOption to 0 in the ini file.
429
8. IP Telephony Capabilities
February 2011