Data Status; Viewing Wan Status - AudioCodes Mediant 800 MSBG User Manual

3.5.3

Data Status

The Data Status menu is used to view and monitor the device's data routing functionality.
This menu includes the following page items:
WAN Status (see ''Viewing WAN Status'' on page 358)
Connection Statistics (see ''Viewing Network Connection Statistics'' on page 359)
Security Log (see ''Viewing Logged Security Events'' on page 360)
QoS Queues Statistics (see ''Viewing QoS Queues Statistics'' on page 362)
Data Log (see ''Viewing Logged Data Events'' on page 363)
Diagnostics (see ''Running Diagnostic Tests'' on page 365)
3.5.3.1

Viewing WAN Status

The WAN Status item allows you to view the WAN access status and provides a series of
diagnostic tests to validate your device's Internet connection. For the diagnostic tests, see
''Running Internet Connectivity Diagnostic Tests'' on page 358.
To view the status of the WAN connection:
Click the WAN Status item (Status & Diagnostics tab > Data Status menu > WAN
Status); the following page appears:
The status of the WAN interface is depicted by the ball-shaped icon located in the top-right
corner:
Green - "Connected": indicates a valid connection to the WAN network.
Red - "Cable Disconnected": Green: indicates that there is no connection to the WAN
network (cable disconnected).
3.5.3.1.1 Running Internet Connectivity Diagnostic Tests
The procedure below describes how to run a series of tests to validate your device's
Internet connection. These tests diagnose and resolve Internet connectivity problems.
SIP User's Manual
Figure 3-312: WAN Status
358
Mediant 800 MSBG
Document #: LTRT-12804