AudioCodes Mediant 800 MSBG User Manual page 212

Parameter
Operation Manipulation Rule (when match occurs in characteristics)
Remove From Left
[RemoveFromLeft]
Remove From Right
[RemoveFromRight]
Leave From Right
[LeaveFromRight]
Prefix to Add
[Prefix2Add]
Suffix to Add
[Suffix2Add]
3.3.2.12.5.3 Configuring IP-to-IP Outbound Manipulations
The 'IP to IP Outbound Manipulation' page allows you to configure up to 100 manipulation
rules for manipulating SIP URI user part (source and destination) of outbound SIP dialog
requests. Manipulation rules in the table are located according to the source IP Group, and
source and destination host and user prefixes and can be applied to a user-defined SIP
request type (e.g., INVITE, OPTIONS, SUBSCRIBE, and /or REGISTER). However, since
outbound manipulations are done only after routing, the outbound manipulation rule
matching can also be done by destination IP Group.
Manipulated destination URI user part are performed on the following SIP headers:
Request URI, To, and Remote-Party-ID (if exists). Manipulated source URI user part are
performed on the following SIP headers: From, P-Asserted (if exists), P-Preferred (if
exists), and Remote-Party-ID (if exists).
Notes:
SIP User's Manual
[3] SUBSCRIBE = only SIP SUBSCRIBE messages
[4] INVITE and REGISTER = all SIP messages except
SUBSCRIBE
[5] INVITE and SUBSCRIBE = all SIP messages except
REGISTER
The number of digits to remove from the left of the user name prefix.
For example, if you enter 3 and the user name is "bobby", the new user
name is "by".
The number of digits to remove from the right of the user name prefix.
For example, if you enter 3 and the user name is "bobby", the new user
name is "bo".
The number of characters that you want retained from the right of the
user name.
The number or string that you want added to the front of the user
name. For example, if you enter 'sir' and the user name is "bobby", the
new user name is "sirbobby".
The number or string that you want added to the end of the user name.
For example, if you enter '01' and the user name is "bobby", the new
user name is "bobby01".
•
For a specific manipulation rule to be effective, the incoming SIP dialog
must match the characteristics configured for that rule.
•
SIP URI host name (source and destination) manipulations are
configured in the 'IP Group' table. These manipulations are simply host
name substitutions with the names defined for the source and destination
IP Groups respectively.
•
The 'IP to IP Outbound Manipulation' table can also be configured using
the ini file table parameter IPOutboundManipulation (see ''SBC
Parameters'' on page 858).
Description
212
Mediant 800 MSBG
Document #: LTRT-12804