SIP User's Manual
2.
Click the New Entry link; the following page appears:
3.
In the 'Description' field, enter a name for the network object.
4.
Click the New Entry link; the following page appears:
5.
From the 'Network Object Type' drop-down list, select a network object type; the page
displays the respective fields for entering the relevant information. The group definition
can be according to one of the following:
•
IP Address: enter an IP address common to the group.
•
IP Subnet: enter a subnet IP address and a subnet mask.
•
IP Range: enter first and last IP addresses in the range.
•
MAC Address: enter a MAC address and mask.
•
Host Name: enter a host name common to the group.
•
DHCP Option: enter a vendor class ID.
6.
Click OK to save the settings.
3.3.3.8.3 Configuring Scheduler Rules
Scheduler rules are used for limiting the activation of Firewall rules to specific time periods,
specified in days of the week, and hours.
To define a scheduler rule:
1.
Click the Scheduler Rules item (Configuration tab > Data menu > Objects and
Rules submenu > Scheduler Rules); the following page appears:
Version 6.2
Figure 3-205: Defining Name for Network Object
Figure 3-206: Defining Network Object Type
Figure 3-207: Configuring Scheduler Rules
285
3. Web-Based Management
February 2011