AudioCodes Mediant 800 MSBG User Manual page 179

SIP User's Manual
3.3.2.11.5 Analog Gateway
The Analog Gateway submenu allows you to configure analog settings. This submenu
includes the following page items:
Keypad Features (see ''Configuring Keypad Features'' on page 179)
Metering Tones (see ''Configuring Metering Tones'' on page 180)
Charge Codes (see ''Configuring Charge Codes'' on page 181)
FXO Settings (see ''Configuring FXO Settings'' on page 182)
Authentication (see ''Configuring Authentication'' on page 183)
Automatic Dialing (see ''Configuring Automatic Dialing'' on page 184)
Caller Display Information (see ''Configuring Caller Display Information'' on page 185)
Call Forward (see ''Configuring Call Forward'' on page 186)
Caller ID Permissions (see ''Configuring Caller ID Permissions'' on page 188)
Call Waiting (see ''Configuring Call Waiting'' on page 189)
Note:
3.3.2.11.5.1 Configuring Keypad Features
The 'Keypad Features' page enables you to activate and deactivate the following features
directly from the connected telephone's keypad:
Call Forward (see ''Configuring Call Forward'' on page 186)
Caller ID Restriction (see ''Configuring Caller Display Information'' on page 185)
Hotline (see ''Configuring Automatic Dialing'' on page 184)
Call Transfer
Call Waiting (see ''Configuring Call Waiting'' on page 189)
Rejection of Anonymous Calls
Notes:
Version 6.2
The Analog Gateway submenu appears only if the device is installed with an
FXS or FXO module.
•
The 'Keypad Features' page is available only for FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
179
3. Web-Based Management
February 2011