AudioCodes Mediant 800 MSBG User Manual page 459

SIP User's Manual
The following parameters are used to configure this feature:
EnableNRTSubscription
ASSubscribeIPGroupID
NRTRetrySubscriptionTime
CallForwardRingToneID
8.3.8.5.2 Call Forward Reminder (Off-Hook) Special Dial Tone
The device plays a special dial tone (Stutter Dial tone - Tone Type #15) to a specific FXS
endpoint when the phone is off-hooked and when a third-party Application server (AS),
e.g., a softswitch is used to forward calls intended for the endpoint, to another destination.
This is useful in that it reminds the FXS user of this service. This feature does not involve
device subscription (SIP SUBSCRIBE) to the AS.
Activation/deactivation of the service is notified by the server. An unsolicited SIP NOTIFY
request is sent from the AS to the device when the Call Forward service is activated or
cancelled. Depending on this NOTIFY request, the device plays either the standard dial
tone or the special dial tone for Call Forward.
For playing the special dial tone, the received SIP NOTIFY message must contain the
following headers:
From and To: contain the same information, indicating the specific endpoint
Event: ua-profile
Content-Type: "application/simservs+xml"
Message body is the XML body and contains the "dial-tone-pattern" set to "special-
condition-tone" (<ss:dial-tone-pattern>special-condition-tone</ss:dial-tone-pattern>),
which is the special tone indication.
For cancelling the special dial tone and playing the regular dial tone, the received SIP
NOTIFY message must contain the following headers:
From and To: contain the same information, indicating the specific endpoint
Event: ua-profile
Content-Type: "application/simservs+xml"
Message body is the XML body containing the "dial-tone-pattern" set to "standard-
condition-tone" (<ss:dial-tone-pattern>standard-condition-tone</ss:dial-tone-pattern>),
which is the regular dial tone indication.
Therefore, the special dial tone is valid until another SIP NOTIFY is received that instructs
otherwise (as described above).
Note:
Version 6.2
if the MWI service is active, the MWI dial tone overrides this special Call
Forward dial tone
459
8. IP Telephony Capabilities
February 2011