Idm Unit Status Indicators - Allen-Bradley Kinetix 6000M User Manual

Indicator Indication
Port 1 Status of the Off
Port 2 EtherNet/IP
Flashing Green
ports
Solid Green
(1) A reset or cycling the power may clear a recoverable fault (depending on the state of the IDM). An unrecoverable fault will require
power cycling and/or modifying the hardware configuration while unpowered to clear the fault.

IDM Unit Status Indicators

IDM unit fault descriptions and actions start on
Figure 37 - IDM Unit Indicators
Indicator
Network Provides communication
Status (N) status for the IDM unit.
Drive Provides general status
Status (D) for the IDM unit.
(1) A reset or cycling the power may clear a recoverable fault (depending on the state of the IDM). An unrecoverable fault will require
power cycling and/or modifying the hardware configuration while unpowered to clear the fault.
Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
Troubleshooting the Kinetix 6000M System
Description
Port is not connected
Port is connected and communication is occurring
Port is connected, but no communication is not occurring
page 95.
Drive Status (D)
Network Status (N)
D N
S1
S10
3
1 2
Indication Description
Off Communication is not active
Flashing green Communication is being established
(1 s interval)
Solid green Communication has been established
Solid red A duplicate address exists
Fast flashing green Firmware update in process
(0.5 s interval)
Slow flashing green Firmware update in process on another IDM
(2 s interval)
Off Power is not applied
Flashing green Module is in standby mode
Solid green Module is operating
Flashing red Recoverable fault has occurred
Solid red Unrecoverable (or hardware) fault has occurred
Chapter 7
(1)
(1)
91