Table of Contents
Advertisement
Chapter 6
Configuring the Kinetix 6000M System
Understanding the IPIM
Module Display
66
The IPIM module has six status indicators (see
page
90) and a four-line LCD display. The indicators and display are used to
monitor the system status, set network parameters, and troubleshoot faults. Four
navigation buttons are located directly below the display and are used to select
items from a soft menu.
Figure 30 - IPIM Module LCD Display
IPIM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
«
»
info
tools
The soft menu provides a changing selection that will correspond to the current
display. Use the navigation buttons to perform the following.
« »
Selecting either arrow will move the selection to the next (or previous) item or value. Depending
on the menu displayed, both arrows may not be shown.
Selecting either arrow will move the selection to the next menu item. It will also change a
selected value. Depending on the menu or item displayed, both arrows may not be shown.
back
Discards changes and returns to the previous screen or home.
cancel
Discards any changes and returns to the home display.
enter
Accepts current selection/value.
info
Selects the Information display for the IPIM or a selected IDM unit.
home
Selecting "home" will discard changes and return to the home display.
tools
Displays the tools menu.
save
Accepts the current selection/value.
Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
Interpret Status Indicators
IPIM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
« »
info
tools
Soft Menu
Navigation Buttons
Status Indicators (see
page
90)
on
Advertisement
Table of Contents
