Appendix C
Upgrading the Kinetix 6000M System Firmware
IDM Unit Firmware Upgrade
122
Follow these steps to select the IDM unit to upgrade.
1. Open your ControlFLASH software.
You can access the ControlFLASH software by either of these methods:
• From the Tools menu in RSLogix 5000 software, choose
ControlFLASH.
• Choose Start>Programs>FLASH Programming Tools>
ControlFLASH.
The Welcome to ControlFLASH dialog box opens.
2. Click Next.
The Catalog Number dialog box opens.
3. Select your IDM unit.
4. Click Next.
Rockwell Automation Publication 2094-UM003A-EN-P - May 2012