Table of Contents
Advertisement
The Progress dialog box opens and upgrading begins.
After the upgrade information is sent to the IDM unit, the unit resets and
performs diagnostic checking.
14. Wait for the Progress dialog box to time out.
It is normal for this process to take several minutes.
IMPORTANT
15. The Update Status dialog box opens and indicates success or failure as
described below.
Upgrading Status
Success
Failure
16. Click OK.
Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
Upgrading the Kinetix 6000M System Firmware
Do not cycle power to the drive during this process or the firmware
upgrade will not complete successfully.
If
1. Update complete appears in a GREEN Status dialog box.
2. Go to
step
16.
1. Update failure appears in a RED Status dialog box.
2. Refer to ControlFLASH Firmware Upgrade Kit Quick Start, publication
1756-QS105, for troubleshooting information.
Appendix C
125
Advertisement
Table of Contents
