Table of Contents
Advertisement
Chapter 4
Kinetix 6000M System Connector Data
IPIM Module Connectors and
Indicators
38
Figure 11 - Module Connectors and Indicators
Item Description
Hybrid cable DC bus connector
Hybrid cable communication signals
connector
Safe-off connector
Enable connector
Sercos fiber-optic connectors
LCD display
Navigation buttons
Status indicators
DC Bus
Control Bus
Port 1 and Port 2
Module Status
Network Status
EtherNet/IP ports
IDM network cable connector
Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
Termination point for +/- DC and PE
Connection point for IDM unit power and
communication
Termination point for safety signals
Enable input to the IDM system
Transmit and receive fiber-optic connectors
Allows ethernet configuration and system status 66
Four buttons provide access and navigation
when using the LCD display
DC bus status
Control bus status (present, faulted)
Communication status of the EtherNet/IP ports
IPIM module status (operating, standby, faulted)
Indicates IDM system network status
Two Ethernet ports are provided
Connection point for network cable to first IDM
unit
See page
39
39
40
41
41
66
90
42
42
Advertisement
Table of Contents
