Table of Contents
Advertisement
Chapter 6
Configuring the Kinetix 6000M System
68
The following information is displayed.
IPIM Information
Module
- IP Address
Status:
- OK
-Standby (OK, but no CIP connection)
-Faulted
-Init Fault (Requires reboot)
Bus Reg Cap
Percent of shunt capacity being
utilized.
Active
Active faults (one per line) will be
Faults:
displayed.
Utilization:
Percent of continuous DC bus current.
Tools Menu
The tools menu provides network setup, sercos light intensity adjustment and
fault help.
Network configuration
Sercos light intensity
IPIM fault help
IDM fault help
V
back
enter
To edit a menu item or value, use the arrow keys to select the desired item, then
press "enter." The up arrow lets you increment the value that is highlighted.
Values will rollover when reaching the end of the list.
Network configuration
Sercos light intensity
enter
IPIM fault help
IDM fault help
V
back
enter
The tools menu provides viewing/editing of the following.
Selection
Description
Network configuration
Mode
IP Address
Subnet mask
Gateway address
Primary address
Secondary Name Server
Sercos light intensity
Selects high or low intensity. Changes to the light intensity will take effect immediately
and be stored in non-volatile memory. The default setting is "High."
IPIM fault help
Displays help text for the selected IPIM fault.
IDM fault help
Displays help text for the selected IDM fault.
Rockwell Automation Publication 2094-UM003A-EN-P - May 2012
IDM Information
Status:
Displays IDM status values.
Safety:
"Motion-allowed" or "Safe-off."
Sercos
Current sercos phase of the IDM: 0 -5.
Phase:
Active Faults: Active faults (one per line) will be displayed.
Static IP
Network mode
111.222.333.444
Static IP
enter
Subnet mask
Gateway address
V
back
enter
Select Static or DHCP configuration.
Edits the IP address.
Edits the subnet mask.
Edits gateway address.
Edits primary name server IP address.
Edit the secondary name server IP address.
Use the right
arrow to move
and the up arrow
»
cancel
save
to change value
Advertisement
Table of Contents
