Download
Share
Print this page
ETC ColorSource CYC v1.7 Installation Manual
  1. Manuals
  2. Brands
  3. ETC Manuals
  4. Lighting Equipment
  5. ColorSource CYC v1.7
  6. Installation manual
ETC ColorSource CYC v1.7 Installation Manual

ETC ColorSource CYC v1.7 Installation Manual

Hide thumbs Also See for ColorSource CYC v1.7:

Advertisement

Quick Links

Download this manual
ETC Installation Guide
ColorSource CYC v1.7/v3.1/v4.0
Overview
The ColorSource CYC is an affordable LED fixture that uses the RGBIL
(red, green, blue, indigo, and lime) color system to provide a rich, bright
light.
Note:
sion of software. For information on updating fixture software,
see
Update the Fixture Software on
Features described in this document require the latest ver-
Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
Global Offices n London, UK | Rome, IT | Holzkirchen, DE | Paris, FR | Hong Kong
Dubai, UAE | Singapore | New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX
Web
etcconnect.com
Contact
etcconnect.com/contactETC
Trademark and patent info:
subject to change. ETC intends this document to be provided in its entirety.
7415M2100-1.7 Rev F Released 2024-10
page 9.
| Support
support.etcconnect.com
| © 2024 Electronic Theatre Controls, Inc.
etcconnect.com/ip
| Product information and specifications

Advertisement

loading
Need help?

Need help?

Do you have a question about the ColorSource CYC v1.7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ETC ColorSource CYC v1.7

Summary of Contents for ETC ColorSource CYC v1.7

  • Page 1 | Support support.etcconnect.com Contact etcconnect.com/contactETC | © 2024 Electronic Theatre Controls, Inc. Trademark and patent info: etcconnect.com/ip | Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 7415M2100-1.7 Rev F Released 2024-10...
  • Page 2 WARNING: RISK OF ELECTRIC SHOCK! The light source in this luminaire is not user-replaceable, and must be replaced only by a qualified technician. Contact ETC Customer Sup- port for assistance. AVERTISSEMENT : RISQUE DE DÉCHARGE ÉLECTRIQUE! La source lumineuse de ce projecteur n'est pas remplaçable par l'utilisateur et ne doit être remplacée seulement par un...

  • Page 3: Installation

    ETC Installation Guide ColorSource CYC v1.7/v3.1/v4.0 The following symbols may appear on product labeling. The luminaire must be installed at Le luminaire doit être installé à au least 0.1 m (4.0 in) away from all moins 0,1 m (4,0 po) de tout objet lighted objects.
  • Page 4 The ColorSource CYC is not self terminating. You must ter- minate the last fixture in line with a 120 Ohm resistor. To pur- chase a terminator, please contact ETC customer service and request part number SGE1507 (XLR terminator). Set Up the Fixture  1.

  • Page 5: Set The Dmx Address

    ETC Installation Guide ColorSource CYC v1.7/v3.1/v4.0 Adjust the Tilt When pipe-mounting the fixture, tilt the fixture so that the base of the fix- ture is perpendicular to the cyclorama.  1. Loosen, but do not remove the yoke locking knobs.  2. Tilt the fixture so that the base of the fixture is perpendicular to the cyclorama.

  • Page 6: Dmx Control Channels

    ) on the ColorSource CYC is not a cal- ibrated mode. As a result, you may see discrepancies in color between fixtures. ETC recommends operating in one of the cal- ibrated modes, such as 5-channel mode or RGB mode. (Calibrated modes make accommodations for the specific LEDs in the array and produce output that is consistent with other fixtures.
  • Page 7 ETC Installation Guide ColorSource CYC v1.7/v3.1/v4.0 Lock the User Interface After you have set up the fixture, you can lock the user interface to pre- vent additional changes.  1. Press and hold the Up button and Down button simultaneously for 3 seconds.
  • Page 8 ETC Installation Guide ColorSource CYC v1.7/v3.1/v4.0 Pre-configured Sequences Sequence Name Rainbow Fast Rainbow Slow     Warm Colors Fast Cool Colors Fast Random Re-record Presets  1. Using DMX, set the desired levels for the new preset.  2. Press the Mode button to access the Presets/Sequences menu.

  • Page 9: Troubleshooting And Maintenance

    ColorSource CYC v1.7/v3.1/v4.0 Troubleshooting and Maintenance Update the Fixture Software ETC recommends using UpdaterAtor software to manage software updates. For information on UpdaterAtor, see the UpdaterAtor Software Quick Guide and the UpdaterAtor Software Release Note , which you can download from etcconnect.com.

  • Page 10: Restore Factory Defaults

    : Screen toggles between to indicate a problem with the color calibration. The fixture will need to be returned to the ETC factory; contact your local dealer to set up a repair.  • : Screen toggles between to indicate that the fixture has gone into over-temperature protection mode to avoid damaging the fixture.

  • Page 11: Specifications And Reference

    ETC Installation Guide ColorSource CYC v1.7/v3.1/v4.0 Specifications and Reference For current and complete compliance and specifications, see the ColorSource CYC datasheet at etcconnect.com. Environment The ColorSource CYC operates in ambient temperatures of 0°C–40°C. The ColorSource CYC is for indoor use only.

  • Page 12: Fcc Compliance

    ETC Installation Guide ColorSource CYC v1.7/v3.1/v4.0 RDM Values Parameter Value Description Manufacturer ID 0x6574 Electronic Theatre Controls ColorSource CYC (v1.7), ColorSource CYC CPU2 Model ID 0x0215 (v3.1), or ColorSource CYC CPU3 (v4.0) DMX Start Address 0x00F0 Range = 1–512 1 = 5 Channel...

This manual is also suitable for:

Colorsource cyc v3.1Colorsource cyc v4.0