ETC Source Four Mini LED User Manual
  1. Manuals
  2. Brands
  3. ETC Manuals
  4. Lighting Equipment
  5. Source Four Mini LED
  6. User manual
ETC Source Four Mini LED User Manual

ETC Source Four Mini LED User Manual

Hide thumbs Also See for Source Four Mini LED:
Table of Contents

Advertisement

Quick Links

Download this manual
Source Four Mini LED
User Manual
Part Number: 7063M1220 Rev H
Released: 2023-07

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Source Four Mini LED and is the answer not in the manual?

Questions and answers

Related Manuals for ETC Source Four Mini LED

Summary of Contents for ETC Source Four Mini LED

  • Page 1 Source Four Mini LED User Manual Part Number: 7063M1220 Rev H Released: 2023-07...
  • Page 2 To view a list of ETC trademarks and patents, go to etcconnect.com/ip. All other trademarks, both marked and not marked, are the property of their respective owners. For a complete list of all third-party licenses that are fully incorporated herein to the extent required by each third-party license terms and conditions, please visit etcconnect.com/licenses.

  • Page 3: Table Of Contents

    Use the AD1 Track Adapter Install Canopy Luminaire Install Portable Luminaire with C-clamp  (120 V Only) Focus and Setup Adjust the Tilt Lock the Rotation (Canopy and Track-Mount) Focus the Beam Shape the Beam Use the Color Frame Holder Source Four Mini LED User Manual...
  • Page 4 Cleaning Specifications and Reference FCC Compliance Source Four Mini LED User Manual...

  • Page 5: Introduction

    • Track-mount and Canopy: Both the track-mount luminaires and the canopy luminaire include an integral driver. You must install a lens tube before you use the Source Four Mini LED. There are four lens tube sizes available: 19°, 26°, 36°, and 50°. See Install a Lens Tube on page 4...

  • Page 6: Safety

    • Ne pas installer le projecteur sur ou à côté d’une surface inflammable. • Vérifiez que le porte-accessoires est verrouillé avant de monter le projecteur. • N’utilisez pas le projecteur sans que la lentille soit installée. Source Four Mini LED User Manual...
  • Page 7 Pour éviter le risque d'incendie ou de choc électrique, utiliser le luminaire à adaptateur pour rail uniquement avec son système de rail désigné (OneTrack ou DataTrack par exemple). WARNING: Use the DataTrack track-mount luminaire with ceiling-mounted track only. Source Four Mini LED User Manual...

  • Page 8: Installation

    IEC 61140 ou IEC 60536. or IEC 60536. Installation Install a Lens Tube You must install a lens tube before you use the Source Four Mini LED. There are four lens tube sizes available: 19°, 26°, 36°, and 50°. Lens Tube Description 4M19LT (-1, -5) 19°...

  • Page 9: Install Track-Mounted Luminaire (Onetrack)

    3. Flip the locking tab to the Flip to lock opposite side to lock the adapter, and then rotate the circuit selection knob to select the correct circuit. Rotate to 4. Focus the luminaire. align circuit with triangle Source Four Mini LED User Manual...

  • Page 10: Install Track-Mounted Luminaire (Datatrack)

    Selecting a dimmable circuit may cause luminaire damage that will void the ETC warranty. 3. Use the circuit selection lock to select the circuit. The desired circuit number should point toward the center of the adapter.

  • Page 11: Use The Ad1 Track Adapter

    ETC offers the option of installing a track-mounted luminaire with an adapter that is compatible with Halo Track Systems. Halo Track Systems are not available from ETC, but the Source Four Mini LED luminaire can be custom-ordered from ETC with the AD1 track adapter.
  • Page 12 7. Open all four shutter blades by sliding them outward until they stop. 8. Install a gobo and gel as desired and confirm that they are properly secured. 9. Restore power at the disconnect device. 10. Focus the luminaire as needed. Source Four Mini LED User Manual...

  • Page 13: Install Portable Luminaire With C-Clamp (120 V Only)

    Focus and Setup below Focus and Setup Adjust the Tilt 1. Loosen, but do not remove the yoke locking knob. 2. Tilt the luminaire as needed. 3. Tighten the yoke locking knob. Yoke locking knob Source Four Mini LED User Manual...

  • Page 14: Lock The Rotation (Canopy And Track-Mount)

    You can shape the beam using the four shutters or with a pattern. Shape the Beam with Shutters The luminaire has four shutters: left, right, top, and bottom. Each shutter can be pulled out or pushed in to create the desired beam shape. Source Four Mini LED User Manual...

  • Page 15: Use The Color Frame Holder

    5. Secure the slot cover by tightening the screw. Use the Color Frame Holder The Source Four Mini LED comes equipped with a color frame (either 70 mm or 2 3/4 in), which is a metal frame used to hold color media (often referred to as gel) in front of the lens.
  • Page 16 3. Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. 4. Slide the lens tube back into the shutter barrel with the color frame retainer clip on the top. 5. Reinstall the beam focus knob. Source Four Mini LED User Manual...
  • Page 17 Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense. Source Four Mini LED User Manual...
  • Page 18 Source Four Mini LED User Manual...
  • Page 19 Source Four Mini LED User Manual...
  • Page 20 Global Offices n London | Rome | Holzkirchen | Paris | Hong Kong | Dubai | Singapore New York | Orlando | Los Angeles | Austin | © 2023 Electronic Theatre Controls, Inc. etcconnect.com | Support support.etcconnect.com Contact etcconnect.com/contactETC | Trademark and patent info: etcconnect.com/ip Third-party license agreement info: etcconnect.com/licenses | Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 7063M1220 Rev H Released 2023-07...

Table of Contents