Table of Contents
Advertisement
Description of the device
Product features
The CP 1613 A2 is a PCI module for connecting PGs/PCs to Industrial Ethernet. The
essential properties are as follows:
● RJ-45 jack for Industrial Ethernet for connecting a TP cable (TP -twisted-pair)
● 15-pin D-sub socket for AUI and ITP
The 15-pin D-sub socket with slide locking mechanism is intended for connection of both
AUI transceiver cables (AUI - Attachment Unit Interface) and for connection of ITP cables
(ITP - Industrial Twisted Pair).
● The following data rates are supported:
– 10/100 Mbps (half/full duplex)
● Own processor on the CP 1613 A2 relieves the PC/PG CPU
● Autosensing, autonegotiation
● The changeover between the AUI and ITP connector is made automatically by the CP
1613 A2 if you use Siemens ITP cables.
● ISO and TCP/IP transport protocol onboard
Hardware requirements
The CP 1613 A2 requires a PCI slot for operation.
LED display
To indicate module activity, the CP 1613 A2 has two LEDs on the RJ-45 jackl that are lit
when data is being received (green) and when data is being sent (yellow).
CP 1613 A2
Operating Instructions, 08/2016, C79000-G8976-C303-02
2
9
Advertisement
Table of Contents
