Dynamic Radar Cruise Control With Full-Speed Range - Suzuki ACROSS 2020 Series Owner's Manual

Table of Contents

Advertisement

Dynamic radar cruise
control with full-speed
range
In vehicle-to-vehicle distance
control mode, the vehicle auto-
matically accelerates, deceler-
ates and stops to match the
speed changes of the preced-
ing vehicle even if the acceler-
ator pedal is not depressed. In
constant speed control mode,
the vehicle runs at a fixed
speed.
Use the dynamic radar cruise
control with full-speed range
on freeways and highways.
 Vehicle-to-vehicle distance
control mode (P.340)
 Constant speed control mode
(P.344)
System Components
Meter display
A
Multi-information display
B
Set speed
C
Indicators
5-5. Using the driving support systems
Operation switches
A
Vehicle-to-vehicle distance
switch
B
"+RES" switch
C
Cruise control main switch
D
Cancel switch
E
"-SET" switch
WARNING
Before using dynamic radar
cruise control with full-speed
range
Driving safely is the sole responsi-
bility of the driver. Do not rely solely
on the system, and drive safely by
always paying careful attention to
your surroundings.
The dynamic radar cruise control
with full-speed range provides driv-
ing assistance to reduce the
driver's burden. However, there are
limitations to the assistance pro-
vided.
Read the following conditions care-
fully. Do not overly rely on this system
and always drive carefully.
• When the sensor may not be cor-
rectly detecting the vehicle
ahead:P.347
337
5

Advertisement

Table of Contents
loading

Table of Contents