Cruise Control System Construction - Suzuki GRAND VITARA JB416 Service Manual

Cruise Control System

Cruise Control System Construction

The cruise control system is a device which maintains a preset vehicle speed while driving at a high speed, e.g., on a
highway. It allows the driver to drive his vehicle at a constant speed of 40 km/h (25 mile/h) or higher without
depressing the accelerator pedal. The system also has such functions as to change the vehicle speed without
operating the accelerator pedal (but using SET/COAST and RES/ACC switches), cancel cruise control (CANCEL
switch) and resume the speed in memory automatically after cruise control is cancelled (RES/ACC switch). The
system mainly consists of electric throttle body assembly, ECM, cruise control switch (MAIN (ON/OFF) switch, SET/
COAST switch, RES/ACC switch and CANCEL switch), etc.
16
1. Combination meter
2. "CRUISE" indicator lamp
3. "SET" indicator lamp
4. Cruise control switch assembly
5. RES/ACC switch
6. MAIN (ON/OFF) switch
General Description
15
14
13
16
10
7. SET/COAST switch
8. CANCEL switch
9. Wheel speed sensor (vehicle speed signal)
10. ABS or ESP® control module
11. Brake light switch with brake pedal position switch
12. Clutch pedal position switch (M/T vehicle only)
9
15
14
10
13
13. ECM
14. Transmission range switch (A/T vehicle only)
15. TCM (A/T vehicle only)
16. Electric throttle body assembly
Cruise Control System:
S5JB0EA101001
3 5
1
2
6
7
9
11
12
I5JB0AA10001-01
10A-1
4
8