Cruise Control (If Equipped) - Suzuki VITARA Series Manual

OPERATING YOUR VEHICLE

Cruise control (if equipped)

The cruise control allows you to maintain a
steady speed without keeping your foot on
the accelerator pedal. The controls for
operating the cruise control are on the
steering wheel.
You can use the cruise control under the
following conditions:
• For manual transaxle vehicle, the gear
position is in 3rd, 4th, 5th or 6th (if
equipped).
• For automatic transaxle vehicle, the
select lever is in "D" position, or the gear
position is in 3rd, 4th, 5th or 6th in the
manual mode.
• The vehicle speed is about 40 km/h (25
mph) or higher.
WARNING
To help avoid loss of vehicle control,
do not use the cruise control when
driving in heavy traffic, on slippery or
winding roads, or on steep downhills.
NOTE:
Established cruising speed may differ a lit-
tle from the speed meter indication
depending on the road conditions.
3-71
Setting cruising speed
Cruise control switches
(2)
(1) "CRUISE" switch
(2) "CANCEL" switch
(3) "RES +" switch
(4) "SET –" switch
Information display
Type A
(1)
(3)
Type B
(4)
(5)
54P000362
(5) Cruise indicator
(6) Set indicator
(7) Set speed indication
1) Turn on the cruise control by pushing
"CRUISE" switch (1). When the cruise
indicator (5) comes on, you can set
cruising speed.
2) Accelerate or decelerate to the desired
speed.
(5) (6)
54P000308
(6) (7)
52RM30880