Bico Technology: Interconnecting Signals - Siemens SINAMICS S120 Function Manual

5.4

BICO technology: interconnecting signals

Description
Every drive contains a large number of interconnectable input and output variables
and internal control variables.
BICO technology (Binector Connector Technology) allows the drive to be adapted
to a wide variety of conditions.
Digital and analog signals, which can be interconnected as required by means of
BICO parameters, are identified by the prefix BI, BO, CI, or CO in their parameter
name. These parameters are identified accordingly in the parameter list or in the
function diagrams.
Note
The STARTER parameterization and commissioning tool is recommended when
you use BICO technology.
Binectors, BI: Binector Input, BO: Binector Output
A binector is a digital (binary) signal without a unit which can assume the value 0
or 1.
Binectors are subdivided into binector inputs (signal sink) and binector outputs
(signal source).
Table 5-3
Abbreviation
and symbol
BI
BO
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
Binectors
Name
Binector input
Binector input
(signal sink)
Binector output
Binector output
(signal source)
Basic Information about the Drive System
BICO technology: interconnecting signals
Description
Can be interconnected to a binector
output as source.
The number of the binector output must
be entered as a parameter value.
Can be used as a source for a binector
input.
5-319