Siemens SINAMICS S120 Function Manual page 286

Extended Functions
Bypass (vector)
Table 4-11
Parameter
p1262 =
p1263 =
p1264 =
p1265 =
p1266 =
p1267.0 =
p1267.1 =
p1267.2 =
p1269[0] =
p1269[1] =
p3800 = 1
p3802 = r1261.2
4-286
Parameter setting for the bypass function with synchronization with overlap
Setting the bypass deadtime
Setting the debypass deadtime
Setting the bypass delay time
Setting of the speed threshold for p1267.1 = 1
Setting of the control signal for p1267.0 = 1
Setting the trigger signal for the bypass function
Signal source to provide the feedback signal of contactor K1
Signal source to provide the feedback signal of contactor K2
The internal voltages are used for synchronization
Synchronization is activated by the bypass function
Description
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition