Siemens SINAMICS S120 Function Manual page 79

S r1527
S p1528[0...n]
S p1529[0...n]
S p1530[0...n]
S p1531[0...n]
S p1532[0...n]
S r1533
S r1534
S r1535
S r1536
S r1537
S r1538
S r1539
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
Lower torque limit all torque limits without offset
CI: Torque limit, upper/motoring, scaling
CI: Torque limit, lower/regenerating scaling
Power limit, motor mode
Power limit, regenerative mode
Torque offset torque limit
Maximum torque-generating current of all current limits
CO: Torque limit, upper total
CO: Torque limit, lower total
Maximum motor-mode torque-generating current limit
Minimum motor-mode torque-generating current limit
CO: Upper effective torque limit
CO: Lower effective torque limit
Operating Modes
Servo control
3-79