Siemens SINAMICS S120 Function Manual page 327

Availability of SW Functions
Table A-1 New functions FW 2.2
No. SW function
1 Technology controller
2 2 command data sets
3 Extended brake control
4 Automatic restart for Vector and Smart Line
Modules 5/10 kW
5 The ability to mix servo and vector V/f
modes on one CU
6 Regulated V
DC link
can be parameterized for active line
modules
7 Smart Mode for Active Line Modules
8 Extended setpoint channel can be
activated
9 Evaluation, linear measuring systems
10 Synchronous motors 1FT6/1FK6/1FK7 with
DRIVE-CLiQ resolver
Table A-2 New functions FW 2.3
No. SW function
1 Motor data set changeover (8 motor data
sets)
2 Buffer for faults/alarms
3 Rotor/pole position identification
4 Booting with partial topology, parking
axis/encoder, de-activating/activating
components
5 Friction characteristic with 10 points along
the characteristic, automatic characteristic
plot
6 Utilization display
7 Evaluation of distance-coded zero marks
for higher-level controls
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
up to 480V input voltage
Available Servo Vector
since FW
2.2 X X
2.2 – X
2.2 X X
2.2 – X
2.2 par- par-
tially tially
2.2 X X
2.2 X X
2.2 X –
2.2 X –
2.2 X –
Available Servo Vector
since FW
2.3 X X
2.3 X X
2.3 X X
2.3 X X
2.3 X X
2.3 X X
2.3 X –
A
HW component
HW component
A-327