Siemens SINAMICS S120 Function Manual page 26

Infeed
Active Infeed
Example: setting the harmonics controller
The 5th and 7th harmonic are to be compensated:
Table 1-4
Index
[0]
[1]
The phase currents in parameter p0069[0..2] (U, V, W) can be checked using the STARTER
trace function.
Overview: key parameters
S p3624
S p3625
S r0069[0..6]
1-26
Example parameters for the harmonics controller
p3624 harmonics controller order
5
7
Infeed harmonics controller order
Infeed harmonics controller scaling
Phase current, actual value
p3625 scaling
100 %
100 %
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition