Siemens SINAMICS S120 Function Manual page 323

BICO interconnections to other drives
The following parameters are available for BICO interconnections to other drives:
S r9490
S r9491[0...15]
S r9492[0...15]
S p9493[0...15]
Copying drives
When a drive is copied, the interconnection is copied with it.
Binector-connector converters and connector-binector converters
Binector-connector converter
S Several digital signals are converted to a 32-bit integer double word or to a
16-bit integer word.
S p2080[0...15]
Connector-binector converter
S A 32-bit integer double word or a 16-bit integer word is converted to individual
digital signals.
S p2099[0...1]
Fixed values for interconnection using BICO technology
The following connector outputs are available for interconnecting any fixed value
settings:
S p2900[0...n]
S p2901[0...n]
S p2930[0...n]
Example:
These parameters can be used to interconnect the scaling factor for the main set-
point or to interconnect an additional torque.
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
Basic Information about the Drive System
BICO technology: interconnecting signals
Number of BICO interconnections to other drives
BI/CI of BICO interconnections to other drives
BO/CO of BICO interconnections to other drives
Reset BICO interconnections to other drives
BI: PROFIBUS PZD send bit-serial
CI: PROFIBUS PZD selection receive bit-serial
CO: Fixed value_%_1
CO: Fixed value_%_2
CO: Fixed Value_M_1
5-323