Siemens SINAMICS S120 Function Manual page 37

Control and status messages
Table 1-7 Basic Infeed open-loop control
Signal name
ON/OFF1
OFF2
Acknowledge error
Master ctrl by PLC
Table 1-8 Basic Infeed status message
Signal name
Ready to power up
Ready to run
Operation enabled
No OFF2 active
Power-on disable
Controlled by PLC
Pre-charging completed
Line contactor energized feedback
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
Internal Binector input
control word
STWAE.0 p0840 ON/OFF2
STWAE.1 p0844 1 OFF2 and
p0845 2 OFF2
STWAE.7 p2103 1
Acknowledge or
p2104 2
Acknowledge or
p2105 3
Acknowledge
STWAE.10 p0854 Master ctrl by
PLC
Internal
status word
ZSWAE.0
ZSWAE.1
ZSWAE.2
ZSWAE.4
ZSWAE.6
ZSWAE.9
ZSWAE.11
ZSWAE.12
Display of internal
control word telegram 370
r0898.0 A_STW1.0
r0898.1 A_STW1.1
r2138.7 A_STW1.7
r0898.10 A_STW1.10
Parameter PROFIBUS
telegram 370
r0899.0 A_ZSW1.0
r0899.1 A_ZSW1.1
r0899.2 A_ZSW1.2
r0899.4 A_ZSW1.4
r0899.6 A_ZSW1.6
r0899.9 A_ZSW1.9
r0899.11 A_ZSW1.11
r0899.12 A_ZSW1.12
Infeed
Basic Infeed
PROFIBUS
1-37