Siemens SINAMICS S120 Function Manual page 175

Table 3-23
Parameter
p0640
p1080
p1082
p1120
p1121
p1135
This optional motor data, if they are known, can be entered. Otherwise, they are
estimated using the rating plate data or are determined using a motor identification
routine or speed controller optimization.
© Siemens AG 2006 All Rights Reserved
SINAMICS S120 Function Manual, 03/2006 Edition
Information on commissioning vector motor types
Optional data, continued
Description
Current limit
Minimum speed
Maximum rotational speed
Ramp-function generator
ramp-up time
Ramp-function generator
ramp-down time
OFF3 ramp-down time
Operating Modes
Comments
This value is limited to a
maximum of 4 * p0305.
The value is pre-assigned
with 1.5 * p0305 during
commissioning.
–
This value can be less than or
equal to p0322.
–
–
–
J
3-175