Outputting A Mip-Pg Pattern - Kyocera TASKalfa 2551ci Service Manual

Item No.
U089

Outputting a MIP-PG pattern

Description
Selects and outputs the MIP-PG pattern created in the machine.
Purpose
To check copier status other than scanner when adjusting image printing, using MIP-PG pattern
output (with-out scanning).
Method
1. Press the start key.
2. Select the MIP-PG pattern to be output and press the start key.
Display
256GRADATION
COLOR BELT
GRAY(C)
GRAY(M)
GRAY(Y)
GRAY(K)
WHITE
GRADATION GRAY 5-graduation gray PG
Sample Set
3. Press the system menu key.
4. Press the start key. A MIP-PG pattern is output.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
PG pattern to be output
256-gradation PG
Four color belts PG
Cyan PG
Magenta PG
Yellow PG
Black PG
Blank paper PG
Four color belts PG,
Cyan PG, Magenta PG,
Yellow PG and Black PG
1-3-57
Purpose
To check the gradation reproducibility
To check the developer state and the
engine section ID
To check the drum quality
To check the drum quality
To check the drum quality
To check the drum quality
To check the drum quality
To check for vertical lines on the laser
scanner unit
Pattern output for LLU assurance
application
2NP