Setting The Id Correction Operation - Kyocera TASKalfa 2551ci Service Manual

Item No.

Setting the ID correction operation

U464
Description
Turns ID correction (calibration) on or off. Also, this determines the duration of calibration and the
timing of calibration during printing. Also, this allows individual settings for calibration operation by
enabling custom settings.
Purpose
To restrict calibration when poor image quality is generated. Also, this allows individual settings
for calibration by enabling custom settings in setting the calibration cycle under the machine
defaults depending on the user preferences.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Permission
Time Interval
Mode
Bias Target
Gamma Target
Calib
FM Calib
Setting: [Permission]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
Calib
Paper Int Calib
Drum Temp
Change
3. Press the start key. The value is set.
Display
Setting of operation permission
Setting of driving time
Setting the color print execution mode
Setting of Bias target
Setting of quantities of light target
Execution of calibration
Setting the FM Calib operation
Setting the permission of calibration.
Setting the permission of calibration
between paper.
A permission setup of a drum polish
temperature change
Description
Description
Description
1-3-148
Setting Initial set-
range ting
On/Off On
On/Off On
On/Off -
2NP