Outputting A Mip-Pg Pattern - Kyocera FS-6525MFP Service Manual

Item No.
U089

Outputting a MIP-PG pattern

Description
Selects and outputs the MIP-PG pattern created in the machine.
Purpose
To check copier status other than scanner when adjusting image printing, using MIP-PG pattern
output (with-out scanning).
Method
1. Press the start key.
2. Select the MIP-PG pattern to be output and press the start key.
Gray Scale
Mono1
(Output density: 0)
Mono4
(Output density: 70)
256-Level
3. Press the system menu key.
4. Press the start key. A MIP-PG pattern is output.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display PG pattern to be output
Description
To check the laser scanner unit engine
output characteristics
To check the drum quality
To check the drum quality
To check resolution reproducibility in
printing
1-3-37
2MW/2MX
Purpose