Detaching And Refitting The Engine Pwb - Kyocera TASKalfa 2551ci Service Manual

(2) Detaching and refitting the engine PWB

Procedures
1. Remove the main PWB.(See page 1-5-
4)
2. Remove the connector from the ISC
PWB.
3. Remove the wires by releasing three
wire saddles.
4. Remove six screws.
5. Pull the left lower cover upwards and
release four hooks.
6. Remove the left lower cover.
Wires
Wire saddles
Screw
Screw
Screw
Screw
Left lower cover
1-5-42
Connector
ISC PWB
Figure 1-5-75
Screw
Screw
Hooks
Figure 1-5-76
2NP