Setting Finisher Stack Quantity - Kyocera TASKalfa 2551ci Service Manual

Hide thumbs Also See for TASKalfa 2551ci:

Table of Contents

Setting finisher stack quantity

Sets the number of sheets of each stack on the main tray and on the middle tray in 1000-sheet

To change the setting when a stack malfunction has occurred.

1. Press the start key.

2. Select the item to be set.

Setting: [Middle Tray]

1. Change the setting using the +/- keys or numeric keys.

Initial setting: 0

Number of sheets of stack on the internal tray for non-staple copying: 10 sheets

2. Press the start key. The setting is set.

3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.

Number of sheets of stack on the middle tray for staple mode

Show Quick Links

Table of Contents

Do you have a question about the TASKalfa 2551ci and is the answer not in the manual?