Checking The Fuser Count; Checking/Setting The Fuser Power Source - Kyocera TASKalfa 2551ci Service Manual

Item No.

Checking the fuser count

U167
Description
Displays the fuser count for checking.
Purpose
To check the fuser count after replacement of the fuser unit.
Method
1. Press the start key. The fuser count is displayed.
Cnt
Release(Time)
Press(Time)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U169

Checking/setting the fuser power source

Description
Displays and settings the reference voltage of the fuser IH PWB.
Purpose
To check the reference voltage.
Method
1. Press the start key.
2. Select the mode.
Display
Mode
1: 100 V specifications 2: 200 V specifications 3: 120 V specifications
4: 110 V specifications
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Fuser count value
Fuser drive time ( Pressing force)
Fuser drive time ( Decompression)
Reference voltage
Description
Description
Description
1-3-83
2NP
Setting range
1 to 4