Kyocera TASKalfa 2551ci Service Manual page 257

Item No.
U485 Setting: [Color Table 1(Copy)],[Color Table 2(Copy)]
1. Default/Custom printer color tables are shown.
2. Press the appropriate button.
3. Press the target button for switching
CTYPE_CA
CTYPE_FJ
CTYPE_KO
CTYPE_KY
CTYPE_RH
CTYPE_TO
CTYPE_J1
CTYPE_SH
4. Press the Start key and [Complete] is displayed.
5. Press the reset key.
6. Once the screen changes to blue, turn the power switch off and on.
* : If either of Color Table 1(Copy) or Color Table 2(Copy) is set, its name is displayed in the
Custom mode under Original Quality for copying.
Setting: [Install]
* : Before proceeding, make sure that the USB flash device that contains the color table files
is inserted.
The color table files must be placed in the root of the USB flash device.
1. Press the Execute button once it is activated.
2. Press the [Start] key.
3. Installation is completed when [OK] is displayed.
Setting: [Uninstall(Prn)/Uninstall(Copy)/]
1. The color table currently being installed is displayed.
2. Select the color table you want to uninstall, then press the Start key.
* : You can select more than one file to simultaneously uninstall them.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Description
1-3-160
2NP