7. Pass the grounding wire of the key card
wires through three wire saddles.
8. Fix the grounding terminals using the
screw.
9. Push the rear cover downwards and
then hook three hooks.
10. Fit the rear cover using eight screws.
* : Pull out the slack electric wires inside a
machine.
11. Adjust the position of the bushing that is
passed key card wires through and then
fix the bandage lid using two screws.
Key card wires
Grounding wire
Rear cover
Screw
Screw
Screw
Screws
Screw
Screw
Screw
Hooks
1-2-64
Screw
Grounding terminal
Wire saddles
Figure 1-2-90
Key card wires
Screws
Bushing
Hook
Figure 1-2-91
2NP-1
Bandage lid