Checking The Operation Of The Exposure Lamp; Adjusting The Shading Position - Kyocera TASKalfa 2551ci Service Manual

Hide thumbs Also See for TASKalfa 2551ci:

Table of Contents

Checking the operation of the exposure lamp

Lights the exposure lamp.

To check whether the exposure lamp are turned on.

1. Press the start key.

2. Select the item.

3. Press the start key. The lamp lights.

4. To turn the lamp off, press the stop key.

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Changes the shading position of the scanner.

Used when the white line continue to appear longitudinally on the image after the shading plate is

This is due to flaws or stains inside the shading plate. To prevent this problem, the shading posi-

tion should be changed so that shading is possible without being affected by the flaws or stains.

1. Press the start key.

2. Select [Position].

3. Change the setting value using the +/- keys or numeric keys.

Increasing the value moves the shading position toward the machine left, and decreasing it

moves the position toward the machine right.

4. Press the start key. The value is set.

While this maintenance item is being executed, copying from an original is available in interrupt

copying mode (which is activated by pressing the system menu key).

Press the stop key. The screen for selecting a maintenance item No. is displayed.

The exposure lamp lights

The CIS lights (when dual scan DP is installed)

Shading position

value per step

Show Quick Links

Table of Contents