Kyocera TASKalfa 2551ci Service Manual page 246

Item No.
U464 Setting: [Time Interval]
1. Select the item to be set.
2. Change the setting value using the cursor left/right keys or numeric keys.
Display
Paper Int Calib
Sleep Out
T/C Calib
Permission
3. Press the start key. The value is set.
Setting: [Mode]
1. Select the item to be set.
Display
Short
Normal
Long
Castum
Auto
2. Press the start key. The value is set.
Setting: [Bias Target/Gamma Target]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
C
M
Y
K
3. Press the start key. The value is set.
Description
Description
Setting the driving time of the calibra-
tion between paper.
Setting the execution time of sleeve
return calibration.
Setting the execution time of T/C cali-
bration.
A permission setup of a T/C Calib
temperature change
Color printing mode setup: Short
Color printing mode setup: Nomal
Color printing mode setup: Long
Color printing mode setup: Costum
Color printing mode setup: Auto
Description
Setting of target (Cyan)
Setting of target (Magenta)
Setting of target (Yellow)
Setting of target (Black)
1-3-149
Setting
0 to 100
0 to 100
0 to 100
On/Off
Description
Setting
range
10 to 1000
10 to 1000
10 to 1000
10 to 1000
2NP
Initial set-
20
18
11
Off
Initial set-
ting
760/300
760/300
750/300
820/400