Connect The Power Cord; Execution Of Initial-Setting Operation - Kyocera TASKalfa 2551ci Service Manual

Connect the power cord

1. Connect the power cord to the connector
on the machine.
2. Insert the power plug into the wall outlet.

Execution of initial-setting operation

1. Turn the main power switch on.
The machine automatically starts to feed toner in the developer unit.
Note: When the main power switch is turned on for the first time, it takes about five minutes until
entering the state that can be copied.
2. The drive chain is disengaged when toner installation is completed.
Wall outlet
Figure 1-2-18
1-2-12
2NP