Setting Toner Near End Detection; Displaying The Temperature And Humidity Outside The Machine - Kyocera TASKalfa 2551ci Service Manual

Hide thumbs Also See for TASKalfa 2551ci:

Table of Contents

Setting toner near end detection

Sets the level that indicates the number of sheets that can be printed from occurrence of toner

near end to toner empty.

To change the setting to advance detection of near end if the interval from toner near end to toner

empty seems too short.

1. Press the start key.

2. Select the item to be set.

3. Change the setting value using the +/- keys or numeric keys.

Increasing the setting makes the interval from toner near end to toner empty longer.

Decreasing the setting makes the interval from toner near end to toner empty shorter.

If 0 is set, toner near end will not be detected.

* : The change is not in the level of set value 5 to 10.

* : Initialsetting for inch specification machine: 0 (except Philippines)

4. Press the start key. The value is set.

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Displays the detected temperature and humidity outside the machine.

To check the temperature and humidity outside the machine.

1. Press the start key. The detected temperature are displayed.

External Temp

External Humidity

LSU Temp(COL)

LSU Temp (K)

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting the level of cyan/magenta/yellow toner 0 to 10

Setting the level of black toner

External temperature (°C)

External humidity (%)

Internal temperature around the laser scanner unit (COL) (°C)

Internal temperature around the laser scanner unit (K) (°C)

Internal temperature around the developer section (°C)

Show Quick Links

Table of Contents