Outputting A Mip-Pg Pattern - Kyocera KM-3050 Service Manual

Maintenance
item No.

Outputting a MIP-PG pattern

U089
Description
Selects and outputs the MIP-PG pattern created in the machine.
Purpose
To check copier status other than scanner when adjusting image printing, using MIP-PG pattern output (with-
out scanning).
Method
1. Press the start key.
2. Select the MIP-PG pattern to be output and press the start key.
Display
GRAYSCALE
MONO-LEVEL
256-LEVEL
1 dot-LINE
3. To change the output conditions of MONO-LEVEL and 1dot-LINE, use the +/- or numeric keys to change
the preset values and press the start key to register the setting.
Description
Output density of MONO-LEVEL
1dot-LINE
4. Press the system menu key.
5. Press the start key. A MIP-PG pattern is output.
6. To return to the screen for selecting an item, press the system menu key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
PG pattern to be output Purpose
To check the laser scanner unit
engine output characteristics.
To check the drum quality.
To check resolution
reproducibility in printing.
To check fine line reproducibility.
To adjust the position of the laser
scanner unit (lateral squareness)
Setting
range
0 to 255
0 to 21
2GN/2GP/2GR-1
Initial
setting
0
0
1-3-37